Discussion:
Rebalance task fails
(too old to reply)
Szymon Miotk
2017-07-07 10:12:24 UTC
Permalink
Raw Message
Hello everyone,


I have problem rebalancing Gluster volume.
Gluster version is 3.7.3.
My 1x3 replicated volume become full, so I've added three more bricks
to make it 2x3 and wanted to rebalance.
But every time I start rebalancing, it fails immediately.
Rebooting Gluster nodes doesn't help.

# gluster volume rebalance gsae_artifactory_cluster_storage start
volume rebalance: gsae_artifactory_cluster_storage: success: Rebalance
on gsae_artifactory_cluster_storage has been started successfully. Use
rebalance status command to check status of the rebalance process.
ID: b22572ff-7575-4557-8317-765f7e52d445

# gluster volume rebalance gsae_artifactory_cluster_storage status
Node Rebalanced-files
size scanned failures skipped status
run time in secs
--------- -----------
----------- ----------- ----------- -----------
------------ --------------
localhost 0
0Bytes 0 0 0 failed
0.00
10.239.40.9 0
0Bytes 0 0 0 failed
0.00
10.239.40.8 0
0Bytes 0 0 0 failed
0.00
volume rebalance: gsae_artifactory_cluster_storage: success:

The messages in logfiles mention 'failed to get index':
[2017-07-07 10:07:18.230202] E [MSGID: 106062]
[glusterd-utils.c:7997:glusterd_volume_rebalance_use_rsp_dict]
0-glusterd: failed to get index

and then the rebalance process crashes:
pending frames:
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
patchset: git://git.gluster.com/glusterfs.git
signal received: 4
time of crash:
2017-07-07 10:07:23
configuration details:
argp 1
backtrace 1
dlfcn 1
libpthread 1
llistxattr 1
setfsid 1
spinlock 1
epoll.h 1
xattr.h 1
st_atim.tv_nsec 1
package-string: glusterfs 3.7.3
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(_gf_msg_backtrace_nomem+0x92)[0x7f24de214502]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(gf_print_trace+0x31d)[0x7f24de23059d]
/lib/x86_64-linux-gnu/libc.so.6(+0x36d40)[0x7f24dd612d40]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x11f6b)[0x7f24dd9b2f6b]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(inode_ref+0x19)[0x7f24de234e69]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(loc_copy+0x4a)[0x7f24de21291a]
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/cluster/distribute.so(dht_local_init+0x4b)[0x7f24d851f51b]
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/cluster/distribute.so(dht_lookup+0x91)[0x7f24d8550521]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(syncop_lookup+0x1a2)[0x7f24de258fc2]
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/cluster/distribute.so(gf_defrag_fix_layout+0x87)[0x7f24d85289e7]
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/cluster/distribute.so(gf_defrag_start_crawl+0x6d3)[0x7f24d8529ce3]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(synctask_wrap+0x12)[0x7f24de255822]
/lib/x86_64-linux-gnu/libc.so.6(+0x498b0)[0x7f24dd6258b0]


Anybody has a clue how to fix 'failed to get index' error?

Thank you in advance!
Szymon Miotk
Nithya Balachandran
2017-07-09 16:37:47 UTC
Permalink
Raw Message
Post by Szymon Miotk
Hello everyone,
I have problem rebalancing Gluster volume.
Gluster version is 3.7.3.
My 1x3 replicated volume become full, so I've added three more bricks
to make it 2x3 and wanted to rebalance.
But every time I start rebalancing, it fails immediately.
Rebooting Gluster nodes doesn't help.
# gluster volume rebalance gsae_artifactory_cluster_storage start
volume rebalance: gsae_artifactory_cluster_storage: success: Rebalance
on gsae_artifactory_cluster_storage has been started successfully. Use
rebalance status command to check status of the rebalance process.
ID: b22572ff-7575-4557-8317-765f7e52d445
# gluster volume rebalance gsae_artifactory_cluster_storage status
Node Rebalanced-files
size scanned failures skipped status
run time in secs
--------- -----------
----------- ----------- ----------- -----------
------------ --------------
localhost 0
0Bytes 0 0 0 failed
0.00
10.239.40.9 0
0Bytes 0 0 0 failed
0.00
10.239.40.8 0
0Bytes 0 0 0 failed
0.00
[2017-07-07 10:07:18.230202] E [MSGID: 106062]
[glusterd-utils.c:7997:glusterd_volume_rebalance_use_rsp_dict]
0-glusterd: failed to get index
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
patchset: git://git.gluster.com/glusterfs.git
signal received: 4
2017-07-07 10:07:23
argp 1
backtrace 1
dlfcn 1
libpthread 1
llistxattr 1
setfsid 1
spinlock 1
epoll.h 1
xattr.h 1
st_atim.tv_nsec 1
package-string: glusterfs 3.7.3
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(_gf_msg_backtrace_nomem+0x92)[
0x7f24de214502]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(gf_print_
trace+0x31d)[0x7f24de23059d]
/lib/x86_64-linux-gnu/libc.so.6(+0x36d40)[0x7f24dd612d40]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x11f6b)[0x7f24dd9b2f6b]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(inode_ref+
0x19)[0x7f24de234e69]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(loc_copy+0x4a)[0x7f24de21291a]
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/
cluster/distribute.so(dht_local_init+0x4b)[0x7f24d851f51b]
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/
cluster/distribute.so(dht_lookup+0x91)[0x7f24d8550521]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(syncop_
lookup+0x1a2)[0x7f24de258fc2]
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/cluster/distribute.so(gf_
defrag_fix_layout+0x87)[0x7f24d85289e7]
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/cluster/distribute.so(gf_
defrag_start_crawl+0x6d3)[0x7f24d8529ce3]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(synctask_
wrap+0x12)[0x7f24de255822]
/lib/x86_64-linux-gnu/libc.so.6(+0x498b0)[0x7f24dd6258b0]
Anybody has a clue how to fix 'failed to get index' error?
Do you have the coredump? If yes, please send that and the rebalance logs
across.

Regards,
Nithya
Post by Szymon Miotk
Thank you in advance!
Szymon Miotk
_______________________________________________
Gluster-users mailing list
http://lists.gluster.org/mailman/listinfo/gluster-users
Szymon Miotk
2017-07-10 19:45:38 UTC
Permalink
Raw Message
Hi Nithya,

the files were sent to priv to avoid spamming the list with large attachments.
Could someone explain what is index in Gluster?
Unfortunately index is popular word, so googling is not very helpful.

Best regards,
Szymon Miotk
Post by Nithya Balachandran
Post by Szymon Miotk
Hello everyone,
I have problem rebalancing Gluster volume.
Gluster version is 3.7.3.
My 1x3 replicated volume become full, so I've added three more bricks
to make it 2x3 and wanted to rebalance.
But every time I start rebalancing, it fails immediately.
Rebooting Gluster nodes doesn't help.
# gluster volume rebalance gsae_artifactory_cluster_storage start
volume rebalance: gsae_artifactory_cluster_storage: success: Rebalance
on gsae_artifactory_cluster_storage has been started successfully. Use
rebalance status command to check status of the rebalance process.
ID: b22572ff-7575-4557-8317-765f7e52d445
# gluster volume rebalance gsae_artifactory_cluster_storage status
Node Rebalanced-files
size scanned failures skipped status
run time in secs
--------- -----------
----------- ----------- ----------- -----------
------------ --------------
localhost 0
0Bytes 0 0 0 failed
0.00
10.239.40.9 0
0Bytes 0 0 0 failed
0.00
10.239.40.8 0
0Bytes 0 0 0 failed
0.00
[2017-07-07 10:07:18.230202] E [MSGID: 106062]
[glusterd-utils.c:7997:glusterd_volume_rebalance_use_rsp_dict]
0-glusterd: failed to get index
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
patchset: git://git.gluster.com/glusterfs.git
signal received: 4
2017-07-07 10:07:23
argp 1
backtrace 1
dlfcn 1
libpthread 1
llistxattr 1
setfsid 1
spinlock 1
epoll.h 1
xattr.h 1
st_atim.tv_nsec 1
package-string: glusterfs 3.7.3
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(_gf_msg_backtrace_nomem+0x92)[0x7f24de214502]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(gf_print_trace+0x31d)[0x7f24de23059d]
/lib/x86_64-linux-gnu/libc.so.6(+0x36d40)[0x7f24dd612d40]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x11f6b)[0x7f24dd9b2f6b]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(inode_ref+0x19)[0x7f24de234e69]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(loc_copy+0x4a)[0x7f24de21291a]
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/cluster/distribute.so(dht_local_init+0x4b)[0x7f24d851f51b]
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/cluster/distribute.so(dht_lookup+0x91)[0x7f24d8550521]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(syncop_lookup+0x1a2)[0x7f24de258fc2]
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/cluster/distribute.so(gf_defrag_fix_layout+0x87)[0x7f24d85289e7]
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/cluster/distribute.so(gf_defrag_start_crawl+0x6d3)[0x7f24d8529ce3]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(synctask_wrap+0x12)[0x7f24de255822]
/lib/x86_64-linux-gnu/libc.so.6(+0x498b0)[0x7f24dd6258b0]
Anybody has a clue how to fix 'failed to get index' error?
Do you have the coredump? If yes, please send that and the rebalance logs
across.
Regards,
Nithya
Post by Szymon Miotk
Thank you in advance!
Szymon Miotk
_______________________________________________
Gluster-users mailing list
http://lists.gluster.org/mailman/listinfo/gluster-users
Nithya Balachandran
2017-07-13 08:12:38 UTC
Permalink
Raw Message
Hi Szymon,

I have received the files and will take a look and get back to you.

In what context are you seeing index?

Thanks,
Nithya
Post by Szymon Miotk
Hi Nithya,
the files were sent to priv to avoid spamming the list with large attachments.
Could someone explain what is index in Gluster?
Unfortunately index is popular word, so googling is not very helpful.
Best regards,
Szymon Miotk
Post by Nithya Balachandran
Post by Szymon Miotk
Hello everyone,
I have problem rebalancing Gluster volume.
Gluster version is 3.7.3.
My 1x3 replicated volume become full, so I've added three more bricks
to make it 2x3 and wanted to rebalance.
But every time I start rebalancing, it fails immediately.
Rebooting Gluster nodes doesn't help.
# gluster volume rebalance gsae_artifactory_cluster_storage start
volume rebalance: gsae_artifactory_cluster_storage: success: Rebalance
on gsae_artifactory_cluster_storage has been started successfully. Use
rebalance status command to check status of the rebalance process.
ID: b22572ff-7575-4557-8317-765f7e52d445
# gluster volume rebalance gsae_artifactory_cluster_storage status
Node Rebalanced-files
size scanned failures skipped status
run time in secs
--------- -----------
----------- ----------- ----------- -----------
------------ --------------
localhost 0
0Bytes 0 0 0 failed
0.00
10.239.40.9 0
0Bytes 0 0 0 failed
0.00
10.239.40.8 0
0Bytes 0 0 0 failed
0.00
[2017-07-07 10:07:18.230202] E [MSGID: 106062]
[glusterd-utils.c:7997:glusterd_volume_rebalance_use_rsp_dict]
0-glusterd: failed to get index
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
patchset: git://git.gluster.com/glusterfs.git
signal received: 4
2017-07-07 10:07:23
argp 1
backtrace 1
dlfcn 1
libpthread 1
llistxattr 1
setfsid 1
spinlock 1
epoll.h 1
xattr.h 1
st_atim.tv_nsec 1
package-string: glusterfs 3.7.3
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(_gf_msg_
backtrace_nomem+0x92)[0x7f24de214502]
Post by Nithya Balachandran
Post by Szymon Miotk
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(gf_print_
trace+0x31d)[0x7f24de23059d]
Post by Nithya Balachandran
Post by Szymon Miotk
/lib/x86_64-linux-gnu/libc.so.6(+0x36d40)[0x7f24dd612d40]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x11f6b)[0x7f24dd9b2f6b]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(inode_ref+
0x19)[0x7f24de234e69]
Post by Nithya Balachandran
Post by Szymon Miotk
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(loc_copy+
0x4a)[0x7f24de21291a]
Post by Nithya Balachandran
Post by Szymon Miotk
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/
cluster/distribute.so(dht_local_init+0x4b)[0x7f24d851f51b]
Post by Nithya Balachandran
Post by Szymon Miotk
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/
cluster/distribute.so(dht_lookup+0x91)[0x7f24d8550521]
Post by Nithya Balachandran
Post by Szymon Miotk
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(syncop_
lookup+0x1a2)[0x7f24de258fc2]
Post by Nithya Balachandran
Post by Szymon Miotk
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/
cluster/distribute.so(gf_defrag_fix_layout+0x87)[0x7f24d85289e7]
Post by Nithya Balachandran
Post by Szymon Miotk
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/
cluster/distribute.so(gf_defrag_start_crawl+0x6d3)[0x7f24d8529ce3]
Post by Nithya Balachandran
Post by Szymon Miotk
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(synctask_
wrap+0x12)[0x7f24de255822]
Post by Nithya Balachandran
Post by Szymon Miotk
/lib/x86_64-linux-gnu/libc.so.6(+0x498b0)[0x7f24dd6258b0]
Anybody has a clue how to fix 'failed to get index' error?
Do you have the coredump? If yes, please send that and the rebalance logs
across.
Regards,
Nithya
Post by Szymon Miotk
Thank you in advance!
Szymon Miotk
_______________________________________________
Gluster-users mailing list
http://lists.gluster.org/mailman/listinfo/gluster-users
Szymon Miotk
2017-07-13 08:32:15 UTC
Permalink
Raw Message
Hi Nithya,
I see index in context:
[2017-07-07 10:07:18.230202] E [MSGID: 106062]
[glusterd-utils.c:7997:glusterd_volume_rebalance_use_rsp_dict]
0-glusterd: failed to get index

I wonder if there is anything I can do to fix it.
I was trying to strace gluster process but still have no clue what
exactly is gluster index.

Best regards,
Szymon Miotk

On Thu, Jul 13, 2017 at 10:12 AM, Nithya Balachandran
Post by Nithya Balachandran
Hi Szymon,
I have received the files and will take a look and get back to you.
In what context are you seeing index?
Thanks,
Nithya
Post by Szymon Miotk
Hi Nithya,
the files were sent to priv to avoid spamming the list with large attachments.
Could someone explain what is index in Gluster?
Unfortunately index is popular word, so googling is not very helpful.
Best regards,
Szymon Miotk
Post by Nithya Balachandran
Post by Szymon Miotk
Hello everyone,
I have problem rebalancing Gluster volume.
Gluster version is 3.7.3.
My 1x3 replicated volume become full, so I've added three more bricks
to make it 2x3 and wanted to rebalance.
But every time I start rebalancing, it fails immediately.
Rebooting Gluster nodes doesn't help.
# gluster volume rebalance gsae_artifactory_cluster_storage start
volume rebalance: gsae_artifactory_cluster_storage: success: Rebalance
on gsae_artifactory_cluster_storage has been started successfully. Use
rebalance status command to check status of the rebalance process.
ID: b22572ff-7575-4557-8317-765f7e52d445
# gluster volume rebalance gsae_artifactory_cluster_storage status
Node Rebalanced-files
size scanned failures skipped status
run time in secs
--------- -----------
----------- ----------- ----------- -----------
------------ --------------
localhost 0
0Bytes 0 0 0 failed
0.00
10.239.40.9 0
0Bytes 0 0 0 failed
0.00
10.239.40.8 0
0Bytes 0 0 0 failed
0.00
[2017-07-07 10:07:18.230202] E [MSGID: 106062]
[glusterd-utils.c:7997:glusterd_volume_rebalance_use_rsp_dict]
0-glusterd: failed to get index
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
patchset: git://git.gluster.com/glusterfs.git
signal received: 4
2017-07-07 10:07:23
argp 1
backtrace 1
dlfcn 1
libpthread 1
llistxattr 1
setfsid 1
spinlock 1
epoll.h 1
xattr.h 1
st_atim.tv_nsec 1
package-string: glusterfs 3.7.3
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(_gf_msg_backtrace_nomem+0x92)[0x7f24de214502]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(gf_print_trace+0x31d)[0x7f24de23059d]
/lib/x86_64-linux-gnu/libc.so.6(+0x36d40)[0x7f24dd612d40]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x11f6b)[0x7f24dd9b2f6b]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(inode_ref+0x19)[0x7f24de234e69]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(loc_copy+0x4a)[0x7f24de21291a]
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/cluster/distribute.so(dht_local_init+0x4b)[0x7f24d851f51b]
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/cluster/distribute.so(dht_lookup+0x91)[0x7f24d8550521]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(syncop_lookup+0x1a2)[0x7f24de258fc2]
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/cluster/distribute.so(gf_defrag_fix_layout+0x87)[0x7f24d85289e7]
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/cluster/distribute.so(gf_defrag_start_crawl+0x6d3)[0x7f24d8529ce3]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(synctask_wrap+0x12)[0x7f24de255822]
/lib/x86_64-linux-gnu/libc.so.6(+0x498b0)[0x7f24dd6258b0]
Anybody has a clue how to fix 'failed to get index' error?
Do you have the coredump? If yes, please send that and the rebalance logs
across.
Regards,
Nithya
Post by Szymon Miotk
Thank you in advance!
Szymon Miotk
_______________________________________________
Gluster-users mailing list
http://lists.gluster.org/mailman/listinfo/gluster-users
Nithya Balachandran
2017-07-13 08:45:43 UTC
Permalink
Raw Message
Post by Szymon Miotk
Hi Nithya,
[2017-07-07 10:07:18.230202] E [MSGID: 106062]
[glusterd-utils.c:7997:glusterd_volume_rebalance_use_rsp_dict]
0-glusterd: failed to get index
I wonder if there is anything I can do to fix it.
I was trying to strace gluster process but still have no clue what
exactly is gluster index.
This message looks like a glusterd log message (not rebalance) and
glusterd_volume_rebalance_use_rsp_dict possibly failed because the
rebalance process had already crashed. The index here is simply the value
of the number of nodes on which the rebalance process should be running -
it is used to track the rebalance status on all nodes.








Best regards,
Post by Szymon Miotk
Szymon Miotk
On Thu, Jul 13, 2017 at 10:12 AM, Nithya Balachandran
Post by Nithya Balachandran
Hi Szymon,
I have received the files and will take a look and get back to you.
In what context are you seeing index?
Thanks,
Nithya
Post by Szymon Miotk
Hi Nithya,
the files were sent to priv to avoid spamming the list with large attachments.
Could someone explain what is index in Gluster?
Unfortunately index is popular word, so googling is not very helpful.
Best regards,
Szymon Miotk
On Sun, Jul 9, 2017 at 6:37 PM, Nithya Balachandran <
Post by Nithya Balachandran
Post by Szymon Miotk
Hello everyone,
I have problem rebalancing Gluster volume.
Gluster version is 3.7.3.
My 1x3 replicated volume become full, so I've added three more bricks
to make it 2x3 and wanted to rebalance.
But every time I start rebalancing, it fails immediately.
Rebooting Gluster nodes doesn't help.
# gluster volume rebalance gsae_artifactory_cluster_storage start
Rebalance
Post by Nithya Balachandran
Post by Szymon Miotk
Post by Nithya Balachandran
Post by Szymon Miotk
on gsae_artifactory_cluster_storage has been started successfully.
Use
Post by Nithya Balachandran
Post by Szymon Miotk
Post by Nithya Balachandran
Post by Szymon Miotk
rebalance status command to check status of the rebalance process.
ID: b22572ff-7575-4557-8317-765f7e52d445
# gluster volume rebalance gsae_artifactory_cluster_storage status
Node Rebalanced-files
size scanned failures skipped status
run time in secs
--------- -----------
----------- ----------- ----------- -----------
------------ --------------
localhost 0
0Bytes 0 0 0 failed
0.00
10.239.40.9 0
0Bytes 0 0 0 failed
0.00
10.239.40.8 0
0Bytes 0 0 0 failed
0.00
[2017-07-07 10:07:18.230202] E [MSGID: 106062]
[glusterd-utils.c:7997:glusterd_volume_rebalance_use_rsp_dict]
0-glusterd: failed to get index
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
patchset: git://git.gluster.com/glusterfs.git
signal received: 4
2017-07-07 10:07:23
argp 1
backtrace 1
dlfcn 1
libpthread 1
llistxattr 1
setfsid 1
spinlock 1
epoll.h 1
xattr.h 1
st_atim.tv_nsec 1
package-string: glusterfs 3.7.3
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(_gf_msg_
backtrace_nomem+0x92)[0x7f24de214502]
Post by Nithya Balachandran
Post by Szymon Miotk
Post by Nithya Balachandran
Post by Szymon Miotk
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(gf_print_
trace+0x31d)[0x7f24de23059d]
Post by Nithya Balachandran
Post by Szymon Miotk
Post by Nithya Balachandran
Post by Szymon Miotk
/lib/x86_64-linux-gnu/libc.so.6(+0x36d40)[0x7f24dd612d40]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x11f6b)[0x7f24dd9b2f6b]
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(inode_ref+
0x19)[0x7f24de234e69]
Post by Nithya Balachandran
Post by Szymon Miotk
Post by Nithya Balachandran
Post by Szymon Miotk
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(loc_copy+
0x4a)[0x7f24de21291a]
Post by Nithya Balachandran
Post by Szymon Miotk
Post by Nithya Balachandran
Post by Szymon Miotk
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/
cluster/distribute.so(dht_local_init+0x4b)[0x7f24d851f51b]
Post by Nithya Balachandran
Post by Szymon Miotk
Post by Nithya Balachandran
Post by Szymon Miotk
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/
cluster/distribute.so(dht_lookup+0x91)[0x7f24d8550521]
Post by Nithya Balachandran
Post by Szymon Miotk
Post by Nithya Balachandran
Post by Szymon Miotk
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(syncop_
lookup+0x1a2)[0x7f24de258fc2]
Post by Nithya Balachandran
Post by Szymon Miotk
Post by Nithya Balachandran
Post by Szymon Miotk
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/
cluster/distribute.so(gf_defrag_fix_layout+0x87)[0x7f24d85289e7]
Post by Nithya Balachandran
Post by Szymon Miotk
Post by Nithya Balachandran
Post by Szymon Miotk
/usr/lib/x86_64-linux-gnu/glusterfs/3.7.3/xlator/
cluster/distribute.so(gf_defrag_start_crawl+0x6d3)[0x7f24d8529ce3]
Post by Nithya Balachandran
Post by Szymon Miotk
Post by Nithya Balachandran
Post by Szymon Miotk
/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(synctask_
wrap+0x12)[0x7f24de255822]
Post by Nithya Balachandran
Post by Szymon Miotk
Post by Nithya Balachandran
Post by Szymon Miotk
/lib/x86_64-linux-gnu/libc.so.6(+0x498b0)[0x7f24dd6258b0]
Anybody has a clue how to fix 'failed to get index' error?
Do you have the coredump? If yes, please send that and the rebalance logs
across.
Regards,
Nithya
Post by Szymon Miotk
Thank you in advance!
Szymon Miotk
_______________________________________________
Gluster-users mailing list
http://lists.gluster.org/mailman/listinfo/gluster-users
Loading...